EMBARK

PH/Time proportionate controlling.
Individual set point based relay operation.
Sensor provided with proper housing & tee ensuring
rigid handling of the sensor.
Alarm acknowledgement facility.
Unique IP65 enclosure.
Panel/field mounted.
On line measurement.
4-20mA out put from meter for your other applications.
Traceability to ERTL/NABL standards.
Programmable control delay.
Easy calibration using front keys.

*Field Mounted Option Available in standard blue box

TECHNICAL SPECIFICATIONS

Measuring Range	0.00 to 14.00
Parameter Sampling Rate:	<2 seconds
Resolution	0.01
Accuracy	+/-0.5% /3 VA
Linearity	0.1%
Supply /Power	230 VAC +/- 15% /3 VAC
Alarms /Control Relays:	2 nos 5A @ 230 VAC
Display:	4 digit 7 segment LED
Enclosure:	ABS Weather Proof
Calibration/set point	Using front panel keypad
Physical dimensions:	96 x 96 x150mm 92 x 92mm (panel cut out)
Temperature	0-100°C
Terminals	Sensor BNC Mains 3Core mains chord through gland.
Relay Output	- 3 core 1mtr. Through glamd. - (optional) screwed terminals on back
Current output	4-20mA optional
Min.water conductivity	5 micros / cm (lower cond sensors optional)
Sensor MOC	Epoxy body with 3mtr. Teflon cable.

METER OPERATION MODES

The meter can be operated in three modes. (Based on relay operation)

Control Mode
In this mode, the relay gets energized and will be time proportionately energized between the set value and the hysteresis.

Alarm Mode
In this mode ,the relay will remain energized as long as it is not acknowledged.

Auto Reset Mode
In this mode, the relay gets automatically reset within 2 seconds.

APPLICATIONS AND USES of PH METER